由于受到天然氣供應的影響，天然氣發電尚處于初始階段。真正大面積的天然氣發電作為分布能源站還要假以時日。現在的小規模天然氣發電主要是在油田、氣田以及機場、酒店、醫院等。可以預計，隨著天然氣供應的愈加充足、供應范圍的不斷擴大，近幾年天然氣發電將會得到一個飛速的發展。燃氣發電機組也借助社會能源需求的發展而發展，不同的動力機械存在什么差別呢？

Due to the impact of natural gas supply, natural gas power generation is still in its initial stage. It will take time for large-scale natural gas power generation to become a distributed energy station. The current small-scale natural gas power generation is mainly in oil fields, gas fields, as well as airports, hotels, hospitals, etc. It can be expected that with the increasing supply of natural gas and the continuous expansion of the supply range, natural gas power generation will experience rapid development in recent years. Gas generator sets have also developed with the help of social energy demand. What are the differences between different power machinery?

內燃機發電和蒸汽輪機、燃氣輪機區別：發電裝置分兩塊：發電部分和動力部分，一般發電部分都差不多，都是線圈切割磁感線，切割運動都是旋轉運動，而動力部分就有區別了，這就是你要問的根本區別。

The difference between internal combustion engine power generation and steam turbine/gas turbine: The power generation device is divided into two parts: the power generation part and the power generation part. Generally, the power generation part is similar, with coils cutting magnetic induction lines and cutting motion being rotational motion, while the power generation part is different. This is the fundamental difference you need to ask.

1、燃氣輪機：壓氣機(即壓縮機)連續地從大氣中吸入空氣并將其壓縮；壓縮后的空氣進入燃燒室，與噴入的燃料混合后燃燒，成為高溫燃氣，隨即流入燃氣渦輪中膨脹做功，推動渦輪葉輪帶著壓氣機葉輪一起旋轉；加熱后的高溫燃氣的做功能力顯著提高，因而燃氣渦輪在帶動壓氣機的同時，尚有余功作為燃氣輪機的輸出機械功。燃氣輪機由靜止起動時，需用起動機帶著旋轉，待加速到能獨立運行后，起動機才脫開。

1. Gas turbine: The compressor continuously draws in air from the atmosphere and compresses it; The compressed air enters the combustion chamber, mixes with the injected fuel, and burns to become high-temperature gas, which then flows into the gas turbine to expand and do work, pushing the turbine impeller to rotate together with the compressor impeller; The work capacity of the heated high-temperature gas is significantly improved, so the gas turbine not only drives the compressor, but also has surplus work as the output mechanical work of the gas turbine. When a gas turbine is started from a stationary state, it needs to be driven by a starter motor to rotate. The starter motor will only disengage when it accelerates to independent operation.

燃氣發電機組

Gas turbine generator set

2、內燃機發電:跟汽車等都是一樣的，燃料在氣缸內燃燒，燃氣膨脹后推動活塞，活塞通過曲柄凸輪機構傳給曲軸，曲軸做旋轉運動，這就可以帶動發電部分了。內燃機發電設備主要有柴油發電機組和燃氣發電機組，燃氣發電機組又分沼氣發電機組、天然氣發電機組、煤氣發電機組、生物質氣發電機組、瓦斯發電機組等等。

2. Internal combustion engine power generation: Similar to cars, fuel is burned in the cylinder, and the gas expands to push the piston. The piston is transmitted to the crankshaft through a crank cam mechanism, and the crankshaft rotates to drive the power generation part. Internal combustion engine power generation equipment mainly includes diesel generator sets and gas generator sets. Gas generator sets are further divided into biogas generator sets, natural gas generator sets, gas generator sets, biomass gas generator sets, gas generator sets, and so on.

3、蒸汽輪機：過熱蒸汽進入到汽輪機，通過動靜葉柵形成的噴嘴作用到轉子上，即將壓力能和熱能轉化為機械能，使轉子旋轉運動，同樣可以帶動發電部分了。

3. Steam turbine: Overheated steam enters the turbine and acts on the rotor through nozzles formed by the dynamic and static blades, converting pressure energy and heat energy into mechanical energy, causing the rotor to rotate and move, and also driving the power generation part.

本文由合金尾氣發電機組為您提供技術支持，更多精彩內容請點擊我們的網站：http://www.qhjingbai.com

This article is supported by an alloy tail gas generator set. For more exciting content, please click on our website: http://www.qhjingbai.com